BA 8K Mirror Stainless Steel Sheet Plate.The Stainless Steel mirror panel is to polish the stainless steel sheetwith the initial surface such as BA, 2B or No.1 by mirror polishing to be similar to the mirror surface (scientific name 8K mirror or No.8).
8K mirror definition: The stainless steel surface is ground and polished, and the surface is as bright as a mirror, reflecting the object, commonly known as mirror 8K, which has corrosion resistance; and the mirror plates is the substrate for processing subsequent colored or etched plates. Mainly used in various decorative or metal optical products.
Literal definition of 8K: The corrosion resistance of stainless steel white steel depends on its alloy composition (chromium, nickel, titanium, silicon, manganese, etc.) and its internal structure. A passivation film is formed, so that the metal is isolated from the outside world without oxidation, and the corrosion resistance of the steel plate is enhanced. The "8" in 8K refers to the proportion of alloy components (304 stainless steel mainly refers to the content of nickel), and "K" refers to the level of reflectivity after polishing (K level is the mirror reflection level) ). 8K mirror is also the mirror grade embodied by chrome-nickel alloy steel.
The common mirror stainless steels has been extended to 6K, 10K, 12K, etc. due to the different degrees of fineness required by customers, and it is "defined" that the larger the number, the higher the fineness of the mirror surface. 6K refers to the rough ground and polished mirror panel, which is a little less effective than the mirror; 10K refers to the finely ground and polished mirror panel, which can be comparable to ordinary mirrors; and 12K refers to the ultra-fine grinding and polishing mirror panel, which can meet the optical use.
Product Name | BA 8K Mirror Stainless Steel Sheet Plate |
Standard | GB ASTM JIS DIN |
Material | 2B,200 Series,300 Series,400 Series,500 Series,600 Series 201, 202, 301, 302, 304, 304L, 316, 316L, 309S, 310S, 321, 409, 420, 430, 430A, 434, 444, 2205, 904L, 2205, 2507, 2520, etc. |
Technology | Hot Rolled ,Cold Rolled |
Tolerance | Control with in the standard, OD:+/-1%, WT:+/-5% |
Application | It is widely used in high temperature applications, medical devices, building materials, chemistry, food industry, agriculture, ship components. It also applies to food, beverage packaging, kitchen supplies, trains, aircraft, conveyor belts, vehicles, bolts, nuts, springs, and screen. |
Payment Terms | 1.FOB 30%T/T,70% Before shipment 2.CIF 30% Pre-payment , Balance must be paid before shipment 3.Irrevocable 100% L/C at sight |
Third Party Inspection | SGS ,BV, MTC |
Advantages | 1.Short delivery time 2.Quality assurance 3.Competitive price, 4.Free Sample |
Delivery Time | Within 25 days after receipt of advance payment |
CHEMICAL COMPONENT |
Grade | C | Si | Mn | P | S | Ni | Cr | Mo |
201 | ≤0.15 | ≤0.75 | 5.5-7.5 | ≤0.06 | ≤0.03 | 3.5-5.5 | 16.0-18.0 | - |
202 | ≤0.15 | ≤1.0 | 7.5-10.0 | ≤0.06 | ≤0.03 | 4.-6.0 | 17.0-19.0 | - |
301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 6.0-8.0 | 16.0-18.0 | - |
302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 8.0-10.0 | 17.0-19.0 | - |
304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 8.0-10.5 | 18.0-20.0 | |
304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 9.0-13.0 | 18.0-20.0 | |
309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 12.0-15.0 | 22.0-24.0 | |
310S | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.035 | ≤0.03 | 19.0-22.0 | 24.0-26.0 | |
316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 10.0-14.0 | 16.0-18.0 | 2.0-3.0 |
316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 12.0-15.0 | 16.0-18.0 | 2.0-3.0 |
321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 9.0-13.0 | 17.0-19.0 | - |
904L | ≤2.0 | ≤0.045 | ≤1.0 | ≤0.035 | - | 23.0-28.0 | 19.0-23.0 | 4.0-5.0 |
2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.030 | ≤0.02 | 4.5-6.5 | 22.0-23.0 | 3.0-3.5 |
2507 | ≤0.03 | ≤0.80 | ≤1.2 | ≤0.035 | ≤0.02 | 6.0-8.0 | 24.0-26.0 | 3.0-5.0 |
2520 | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.045 | ≤0.03 | 0.19-0.22 | 0.24-0.26 | - |
410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | - | 11.5-13.5 | - |
430 | 0.12 | ≤0.75 | ≤1.0 | ≤0.040 | ≤0.03 | ≤0.60 | 16.0-18.0 | - |
Surface Finish | Characteristics and application |
2B | The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses. |
No.1 | Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc. |
No.4 | Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
HL | Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc. |
8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
Stainless steel sheet/plate/coil is an alloy steel with smooth surface, high weldability, corrosion resistance, polishability, heat
resistance, corrosion resistance and other characteristics. It is widely used in various industries and is an important material in modern industry. Stainless steel is divided into austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, and duplex stainless steel according to the structure state.
Austenitic Stainless Steel:
stainless steel with an austenitic structure at room temperature. Steel contains Cr≈18%, Ni≈8%-25% and C≈0.1%. Steel has high toughness and plasticity, but low strength.
Martensitic Stainless Steel:
A steel whose mechanical properties can be adjusted by heat treatment. It has different strength and toughness at different tempering temperatures.
Duplex Stainless Steel: Austenitic and ferrite each account for about half of the structure. When the C content is low, the Cr content is 18% to 28%, and the Ni content is 3% to 10%. Some steels also contain alloying elements such as Mo, Cu, Si, Nb, Ti, and N. This type of steel has the characteristics of austenitic and ferritic stainless steel.
Ferritic Stainless Steel:
It contains 15% to 30% chromium and has a body-centered cubic crystal structure. This type of steel generally does not contain nickel, and sometimes contains a small amount of Mo, Ti, Nb and other elements. This type of steel has the characteristics of large thermal conductivity, small expansion coefficient, good oxidation resistance, and excellent stress corrosion resistance.
Stainless steel production mainly includes crude steel smelting, hot rolling, and cold rolling.
1)Used in industrial, chemical equipment,
2)Used in life stainless steel items ,
3)Building materials, architectural decoration,
4)Storage tanks used for appliances and kitchen equipment.
Q: Are you a manufacturer?
A: Yes , we are a Stainless steel sheet/plate/coil manufacturer, We have own factory, which is located in Shandong,China. We have a leading power in producing and exporting stainless steel coil,cold rolled stainless steel sheet, etc. We promise that we are what you are looking for.
Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up .
Q: Do you have quality control?
A: Yes, we can accept BV, SGS third inspection .
Q: Can you arrange the shipment?
A: Sure, we have permanent freight forwarder who can gain the best price from most ship company and offer professional service.
Q: How long is your delivery time?
A: Generally it is 7-14 days if the goods are in stock. or it is 25-35 days if the goods are not in stock, it is according to quantity.
Q:How can we get the offer?
A:Please offer the specification of the product,such as material,size,shape,etc.So we can give the best offer.
Q:Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real samples,but customers need to pay the freight cost.
Q: How do you make our business long-term and good relationship ?
A: 1.We keep good quality and competitive price to ensure our customers' benefit.
2.We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.