JIS G3125 NH Steel Plate . corten steel, is a series of low-alloy steels between ordinary steel and Stainless Steel. Weathering steel is made of ordinary carbon steel with a small amount of corrosion-resistant elements such as copper and nickel. It has the characteristics of toughness, plasticity, forming, welding and cutting, wear resistance, high temperature resistance and fatigue resistance of high-quality steel. The weather resistance is 2-8 times that of ordinary carbon steel, and the coating performance is 1.5-10 times that of ordinary carbon steel. At the same time, it has the characteristics of rust prevention, corrosion resistance, prolonging service life, thinning and consumption reduction, labor saving and energy saving. Weathering steel is mainly used for railway, vehicle, bridge, iron tower, photovoltaic, high-speed engineering and other steel structures exposed to the atmosphere for a long time. It is used to manufacture containers, railway vehicles, oil derricks, seaport buildings, oil production platforms and containers containing hydrogen sulfide corrosive media in chemical and petroleum equipment.
The welding process is the most advanced open arc welding process, which has little impact on various properties of the base and can give full play to the wear effect to the greatest extent. Composite wear-resistant plate is made of ordinary steel (Q235 (A3) or heat-resistant steel (15CrMo, 12Cr! MOV, etc.), Stainless Steel Plate, which is formed on the Cr7C3 carbide based wear-resistant layer with a volume fraction of more than 50%. It has high wear resistance, impact resistance, deformability and welding performance. It is similar to steel and processing departments such as direct deformation, cutting and drilling. It is processed into mining engineering parts to meet wear and put into use. Compared with many wear-resistant composite plates, wear-resistant materials have their irreplaceable characteristics.
High weather resistant structural steel is mainly used for bolted connection, riveting and welding structural parts of vehicles, containers, buildings, towers and other structures, because its atmospheric corrosion resistance is better than that of welded structure. When used as welded structural members, the thickness of steel shall not exceed 16mm. The welding performance of weathering steel for welded structure is better than that of high weathering structural steel. It is mainly used for welded structural parts of bridges, buildings and other structures.
Description:
Product Name | JIS G3125 NH Steel Plate |
Standard | ASTM DIN JIS GB |
Material | Corten A/B,A588 Gr A/B/C,A242 Type 1,A606 Type 4 SPA-H,Q345GNHL ,Q235NH,Q355NH ,09CuPS235JOW,S235J2W,S355JOWP,S355J2WP,S355JOW NM360, NM400, NM450, NM500,NR360, NR400,B-HARD360, B-HARD400, B-HARD450 KN-55, KN-60, KN-63,AR400, AR450, AR500, AR600 |
Technology | Hot Rolled ,Cold Rolled |
Tolerance | Control with in the standard, OD:+/-1%, WT:+/-5% |
Application | Widely used in marine components, building steel structure components, substation auxiliary facilities, light industry, etc. |
Payment Terms | 1.FOB 30%T/T,70% Before shipment 2.CIF 30% Pre-payment , Balance must be paid before shipment 3.Irrevocable 100% L/C at sight |
Third Party Inspection | SGS ,BV, MTC |
Advantages | 1.Short delivery time 2.Quality assurance 3.Competitive price, 4.Free Sample |
Delivery Time | Within 25 days after receipt of advance payment |
Wear/Abrasion Resistant Steel --- Chinese Standard
Wear/Abrasion Resistant Steel Equivalent Standards |
Steel Grade | SSAB | JFE | DILLIDUR | ThyssenkKrupp | Ruukki |
NM360 | - | EH360 | - | - | - |
NM400 | HARDOX400 | EH400 | 400V | XAR400 | Raex400 |
NM450 | HARDOX450 | - | 450V | XAR450 | Raex450 |
NM500 | HARDOX500 | EH500 | 500V | XAR500 | Raex500 |
Chemical Composition (%) of NM Wear Resistant Steel |
Steel Grade | C | Si | Mn | P | S | Cr | Mo | B | N | H | Ceq |
NM360/NM400 | ≤0.20 | ≤0.40 | ≤1.50 | ≤0.012 | ≤0.005 | ≤0.35 | ≤0.30 | ≤0.002 | ≤0.005 | ≤0.00025 | ≤0.53 |
NM450 | ≤0.22 | ≤0.60 | ≤1.50 | ≤0.012 | ≤0.005 | ≤0.80 | ≤0.30 | ≤0.002 | ≤0.005 | ≤0.00025 | ≤0.62 |
NM500 | ≤0.30 | ≤0.60 | ≤1.00 | ≤0.012 | ≤0.002 | ≤1.00 | ≤0.30 | ≤0.002 | ≤0.005 | ≤0.0002 | ≤0.65 |
NM550 | ≤0.35 | ≤0.40 | ≤1.20 | ≤0.010 | ≤0.002 | ≤1.00 | ≤0.30 | ≤0.002 | ≤0.0045 | ≤0.0002 | ≤0.72 |
Mechanical Properties of NM Wear Resistant Steel |
Steel Grade | Yield Strength /MPa | Tensile Strength /MPa | Elongation A50 /% | Hardess (Brinell) HBW10/3000 | Impact/J (-20℃) |
NM360 | ≥900 | ≥1050 | ≥12 | 320-390 | ≥21 |
NM400 | ≥950 | ≥1200 | ≥12 | 380-430 | ≥21 |
NM450 | ≥1050 | ≥1250 | ≥7 | 420-480 | ≥21 |
NM500 | ≥1100 | ≥1350 | ≥6 | ≥470 | ≥17 |
NM550 | - | - | - | ≥530 | - |
Wear/Abrasion Resistant Steel --- USA Standard
Abrasion Resistant Steel Plate Availabillity |
Grade | Thickness | Width | Length |
AR200 / AR 235 | 3/16" – 3/4" | 48" – 120" | 96" – 480" |
AR400F | 3/16" – 4" | 48" – 120" | 96" – 480" |
AR450F | 3/16" – 2 " | 48" – 96 " | 96" – 480" |
AR500 | 3/16" – 2 " | 48" – 96 " | 96" – 480" |
AR600 | 3/16" – 3/4" | 48" – 96 " | 96" – 480" |
Chemical Composition of Abrasion Resistant Steel Plate |
Grade | C | Si | Mn | P | S | Cr | Ni | Mo | B |
AR500 | 0.3 | 0.7 | 1.7 | 0.025 | 0.015 | 1 | 0.7 | 0.5 | 0.005 |
AR450 | 0.26 | 0.7 | 1.7 | 0.025 | 0.015 | 1 | 0.7 | 0.5 | 0.005 |
AR400 | 0.25 | 0.7 | 1.7 | 0.025 | 0.015 | 1.5 | 0.7 | 0.5 | 0.005 |
AR300 | 0.18 | 0.7 | 1.7 | 0.025 | 0.015 | 1.5 | 0.4 | 0.5 | 0.005 |
Mechanical Properties of Abrasion Resistant Steel Plate |
Grade | Yield Strength MPa | Tensile Strength MPa | Elongation A | Impact Strength Charpy V 20J | Hardness Range |
AR500 | 1250 | 1450 | 8 | -30C | 450-540 |
AR450 | 1200 | 1450 | 8 | -40C | 420-500 |
AR400 | 1000 | 1250 | 10 | -40C | 360-480 |
AR300 | 900 | 1000 | 11 | -40C | - |
Product Show:
The steel plate is a flat steel that is cast with molten steel and pressed after cooling.
The Steel Sheet is flat, rectangular and can be directly rolled or cut from wide steel strips.
The steel plates is divided according to the thickness, the thin steel plate is less than 4 mm (the thinnest is 0.2 mm), the medium-thick steel plate is 4-60 mm, and the extra-thick steel plate is 60-115 mm.
Steel sheets are divided into hot rolling plate and cold rolling plate according to rolling.
Production Process:
1. Hot Rolled Steel Plate
Hot rolling processing methods include hot rolling, forging, extrusion and other methods.
2. Cold Rolled Steel Plate
Cold rolling processing methods include cold rolling, cold drawing and cold drawing, cold bending, cold extrusion and other methods.
The cold rolling method is to continue processing the hot rolled steel below the recrystallization temperature to make it cold rolled steel. Using cold rolling processing method can improve the mechanical properties of steel, and obtain products with high dimensional accuracy and certain smoothness.
Appliction:
Weathering steel is mainly used for railway, vehicle, bridge, iron tower, photovoltaic, high-speed engineering and other steel structures exposed to the atmosphere for a long time. It is used to manufacture containers, railway vehicles, oil derricks, seaport buildings, oil production platforms and containers containing hydrogen sulfide corrosive media in chemical and petroleum equipment.
Packing and Shipping:
FAQ:
Q: Are you a manufacturer?
A: Yes , we are a Carbon Steel Sheet manufacturer, We have own factory, which is located in Shandong,China. We have a leading power in producing and exporting Carbon Steel Plate,Cold Rolled Steel Sheet, etc. We promise that we are what you are looking for.
Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up .
Q: Do you have quality control?
A: Yes, we can accept BV, SGS third inspection .
Q: Can you arrange the shipment?
A: Sure, we have permanent freight forwarder who can gain the best price from most ship company and offer professional service.
Q: How long is your delivery time?
A: Generally it is 7-14 days if the goods are in stock. or it is 25-35 days if the goods are not in stock, it is according to quantity.
Q:How can we get the offer?
A:Please offer the specification of the product,such as material,size,shape,etc.So we can give the best offer.
Q:Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real samples,but customers need to pay the freight cost.
Q: How do you make our business long-term and good relationship ?
A: 1.We keep good quality and competitive price to ensure our customers' benefit.
2.We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.