H-beam is an economical section and high-efficiency profile with more optimized cross-sectional area distribution and more reasonable strength-to-weight ratio. It is named because its cross section is the same as the English letter "H". Since all parts of H-beam are arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structure in all directions, and has been widely used. The inner and outer sides of the flange of H-beam Parallel or nearly parallel, the flange ends are at right angles, hence the name parallel flange I-beam. The thickness of the web of the H-beam is smaller than that of the common I-beam with the same height of the web, and the flange width is larger than that of the common I-beam with the same height of the web, so it is also named wide-edge I-beam. Determined by the shape, the section modulus, moment of inertia and corresponding strength of H-beam are obviously better than ordinary I-beam of the same single weight. Used in metal structures with different requirements, whether it is subjected to bending moment, pressure load, or eccentric load, it shows its superior performance. Compared with ordinary I-beam, it can greatly improve the bearing capacity and save metal by 10% to 40%. H-beams have wide flanges, thin webs, many specifications, and flexible use. They can save 15% to 20% of metal when used in various truss structures. Because the inner and outer sides of the flanges are parallel, and the edge ends are at right angles, it is easy to assemble and combine into various components, which can save about 25% of the welding and riveting workload, which can greatly speed up the construction speed of the project and shorten the construction period.
Product Name | A36 Structural Steel H-beam |
Standar | ASTM |
Material | 235B Q345B Q420C Q460C SS400 SS540 S235 S275 S355 A36 A572 G50 G60 |
Technology | Hot Rolled ,Cold Rolled |
Chemical Composition | C:≤0.21% Si:≤ / Mn:≤1.50% P:≤0.045% S:≤0.045% |
Mechanical Property | Yield Strength (MPa)≥:275 Tensile Strength (MPa):430-580 Elongation %≥:23 |
Tolerance | Control with in the standard, OD:+/-1%, WT:+/-5% |
Application | Widely used in automobiles, motorcycles, gas springs, hydraulic machinery, construction machinery and refrigeration industry |
Payment Terms | 1.FOB 30%T/T,70% Before shipment 2.CIF 30% Pre-payment , Balance must be paid before shipment 3.Irrevocable 100% L/C at sight |
Third Party Inspection | SGS ,BV, MTC |
Advantages | 1.Short delivery time 2.Quality assurance 3.Competitive price, 4.Free Sample |
Delivery Time | Within 25 days after receipt of advance payment |
H-beams can be produced by welding or rolling. Welded H-beam is to cut strip of suitable thickness to suitable width, and weld the flange and web together on a continuous welding unit. Welded H-beam has the disadvantages of large metal consumption, difficult to ensure uniform product performance, and limited size specifications. Therefore, H-beams are mainly produced by rolling method. In modern steel rolling production, H-beams are rolled using universal rolling mills. The web of the H-beam is rolled between the upper and lower horizontal rolls, and the flanges are rolled and formed simultaneously between the side of the horizontal roll and the vertical roll.
Applications of Hot sell structural galvanized Steel H Beam with low price
Widely use in construction and other posting application. Size from 100*100mm to 900*300mm , weight per meter from 17.2Kg to 286Kg. The standard length is 6 meters and 12 meters. The most popular grades are Q235B (Equivalent with St37.2, S235JR,ASTM A36) and Q345B (Equivalent with St52.3, S355JR).
Hot sell structural galvanized steel h beam low price Applications: Use in construction and other posting application or steel structure. Hot sell structural galvanized steel h beam low price Advantage:
We have very good business channels with local mills. We always supply the quality steel products in very competitive price and make every process including produce, domestic transportation, inspection and shipment under our control.
Packaging | Standard seaworthy export packing, other types of packing can be customized as every requirement. |
Shipping packaging | Bundled with firm steel straps, easy for loading and unloading. |
Q: Are you a manufacturer?
A: Yes , we are a Seamless Steel Pipe manufacturer, We have own factory, which is located in Shandong,China. We have a leading power in producing and exporting various steel products. We promise that we are what you are looking for.
Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up .
Q: Do you have quality control?
A: Yes, we can accept BV, SGS third inspection .
Q: Can you arrange the shipment?
A: Sure, we have permanent freight forwarder who can gain the best price from most ship company and offer professional service.
Q: How long is your delivery time?
A: Generally it is 7-14 days if the goods are in stock. or it is 25-35 days if the goods are not in stock, it is according to quantity.
Q:How can we get the offer?
A:Please offer the specification of the product,such as material,size,shape,etc.So we can give the best offer.
Q:Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real samples,but customers need to pay the freight cost.
Q: How do you make our business long-term and good relationship ?
A: 1.We keep good quality and competitive price to ensure our customers' benefit.
2.We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.