SA-179 is an American standard low-carbon cold-drawn Carbon Steel Pipe for condensers and heat exchangers. The executive standard: SA-179M-2010 Seamless cold-drawn low-carbon pipes for heat exchangers and condensers. Mainly used for heat exchangers, as U-tubes. The material of sa179 corresponding to China is GB8163 10# Seamless Steel Pipe.
SA-179 seamless Steel Pipe has a hollow section and is widely used as a pipeline for transporting fluids, such as pipelines for transporting oil, natural gas, gas, water and certain solid materials. Compared with solid steel such as round steel, the steel pipe is lighter in weight when the bending and torsional strength is the same, and is an economical section steel.
Product Name | Fluid Steel Pipe |
Standard | ASTM |
Material | ASTM A285M GR.B (Equivalent to GB 20# ,ASTM A106 GR.B ,API 5L GR.B ) |
Technology | Hot Rolled ,Cold Rolled,Cold Drawn,Hot Expended |
Chemical Composition | C :0.17%~0.2% Si:0.17%~0.37% Mn:0.35%~0.65% S :≤0.035% P :≤0.035% Cr:≤0.25% Ni:≤0.25% Cu:≤0.25% |
Physical Property | Tensile strength σ b (MPa):≥410(42) yield strength σ s (MPa):≥245(25) Elongation δ (%):≥25 Reduction of area ψ (%):≥5, Hardness: without heat treatment, ≤ 156hb |
Tolerance | Control with in the standard, OD:+/-1%, WT:+/-5% |
Application | General seamless steel pipe for transporting water, oil, gas and other fluids |
Payment Terms | 1.FOB 30%T/T,70% Before shipment 2.CIF 30% Pre-payment , Balance must be paid before shipment 3.Irrevocable 100% L/C at sight |
Third Party Inspection | SGS ,BV, MTC |
Advantages | 1.Short delivery time 2.Quality assurance 3.Competitive price, 4.Free Sample |
Delivery Time | Within 25 days after receipt of advance payment |
PSL | Delivery Condition | Pipe grade |
PSL1 | As-rolled, normalized, normalizing formed | A |
As-rolled, normalizing rolled, thermomechanical rolled, thermo-mechanical formed, normalizing formed, normalized, normalized and tempered or if agreed Q&T SMLS only | B |
As-rolled, normalizing rolled, thermomechanical rolled, thermo-mechanical formed, normalizing formed, normalized, normalized and tempered | X42, X46, X52, X56, X60, X65, X70 |
PSL 2 | As-rolled | BR, X42R |
Normalizing rolled, normalizing formed, normalized or normalized and tempered | BN, X42N, X46N, X52N, X56N, X60N |
Quenched and tempered | BQ, X42Q, X46Q, X56Q, X60Q, X65Q, X70Q, X80Q, X90Q, X100Q |
Thermomechanical rolled or thermomechanical formed | BM, X42M, X46M, X56M, X60M, X65M, X70M, X80M |
Thermomechanical rolled | X90M, X100M, X120M |
The suffice (R, N, Q or M) for PSL2 grades, belongs to the steel grade |
PLS1 Steel Grade | Mass fraction, % based on heat and product analyses a,g |
C | Mn | P | S | V | Nb | Ti |
max b | max b | max | max | max | max | max |
Seamless Pipe |
A | 0.22 | 0.9 | 0.3 | 0.3 | – | – | – |
B | 0.28 | 1.2 | 0.3 | 0.3 | c,d | c,d | d |
X42 | 0.28 | 1.3 | 0.3 | 0.3 | d | d | d |
X46 | 0.28 | 1.4 | 0.3 | 0.3 | d | d | d |
X52 | 0.28 | 1.4 | 0.3 | 0.3 | d | d | d |
X56 | 0.28 | 1.4 | 0.3 | 0.3 | d | d | d |
X60 | 0.28 e | 1.40 e | 0.3 | 0.3 | f | f | f |
X65 | 0.28 e | 1.40 e | 0.3 | 0.3 | f | f | f |
X70 | 0.28 e | 1.40 e | 0.3 | 0.3 | f | f | f |
Welded Pipe |
A | 0.22 | 0.9 | 0.3 | 0.3 | – | – | – |
B | 0.26 | 1.2 | 0.3 | 0.3 | c,d | c,d | d |
X42 | 0.26 | 1.3 | 0.3 | 0.3 | d | d | d |
X46 | 0.26 | 1.4 | 0.3 | 0.3 | d | d | d |
X52 | 0.26 | 1.4 | 0.3 | 0.3 | d | d | d |
X56 | 0.26 | 1.4 | 0.3 | 0.3 | d | d | d |
X60 | 0.26 e | 1.40 e | 0.3 | 0.3 | f | f | f |
X65 | 0.26 e | 1.45 e | 0.3 | 0.3 | f | f | f |
X70 | 0.26e | 1.65 e | 0.3 | 0.3 | f | f | f |
PSL2 Steel Grade | Mass fraction, % based on heat and product analyses | Carbon Equiv a |
C | Si | Mn | P | S | V | Nb | Ti | Other | CE IIW | CE Pcm |
max b | max | max b | max | max | max | max | max | max | max |
Seamless and Welded Pipe |
BR | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | c | c | 0.04 | e,l | 0.43 | 0.25 |
X42R | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | 0.06 | 0.05 | 0.04 | e,l | 0.43 | 0.25 |
BN | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | c | c | 0.04 | e,l | 0.43 | 0.25 |
X42N | 0.24 | 0.4 | 1.2 | 0.025 | 0.015 | 0.06 | 0.05 | 0.04 | e,l | 0.43 | 0.25 |
X46N | 0.24 | 0.4 | 1.4 | 0.025 | 0.015 | 0.07 | 0.05 | 0.04 | d,e,l | 0.43 | 0.25 |
X52N | 0.24 | 0.45 | 1.4 | 0.025 | 0.015 | 0.1 | 0.05 | 0.04 | d,e,l | 0.43 | 0.25 |
X56N | 0.24 | 0.45 | 1.4 | 0.025 | 0.015 | 0.10f | 0.05 | 0.04 | d,e,l | 0.43 | 0.25 |
X60N | 0.24f | 0.45f | 1.40f | 0.025 | 0.015 | 0.10f | 0.05f | 0.04f | g,h,l | As agreed |
BQ | 0.18 | 0.45 | 1.4 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.43 | 0.25 |
X42Q | 0.18 | 0.45 | 1.4 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.43 | 0.25 |
X46Q | 0.18 | 0.45 | 1.4 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.43 | 0.25 |
X52Q | 0.18 | 0.45 | 1.5 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.43 | 0.25 |
X56Q | 0.18 | 0.45f | 1.5 | 0.025 | 0.015 | 0.07 | 0.05 | 0.04 | e,l | 0.43 | 0.25 |
X60Q | 0.18f | 0.45f | 1.70f | 0.025 | 0.015 | g | g | g | h,l | 0.43 | 0.25 |
X65Q | 0.18f | 0.45f | 1.70f | 0.025 | 0.015 | g | g | g | h,l | 0.43 | 0.25 |
X70Q | 0.18f | 0.45f | 1.80f | 0.025 | 0.015 | g | g | g | h,l | 0.43 | 0.25 |
X80Q | 0.18f | 0.45f | 1.90f | 0.025 | 0.015 | g | g | g | i,j | As agreed |
X90Q | 0.16f | 0.45f | 1.9 | 0.02 | 0.01 | g | g | g | j,k | As agreed |
X100Q | 0.16f | 0.45f | 1.9 | 0.02 | 0.01 | g | g | g | j,k | As agreed |
Welded Pipe |
BM | 0.22 | 0.45 | 1.2 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.43 | 0.25 |
X42M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.43 | 0.25 |
X46M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.43 | 0.25 |
X52M | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | d | d | d | e,l | 0.43 | 0.25 |
X56M | 0.22 | 0.45f | 1.4 | 0.025 | 0.015 | d | d | d | e,l | 0.43 | 0.25 |
X60M | 0.12f | 0.45f | 1.60f | 0.025 | 0.015 | g | g | g | h,l | 0.43 | 0.25 |
X65M | 0.12f | 0.45f | 1.60f | 0.025 | 0.015 | g | g | g | h,l | 0.43 | 0.25 |
X70M | 0.12f | 0.45f | 1.70f | 0.025 | 0.015 | g | g | g | h,l | 0.43 | 0.25 |
X80M | 0.12f | 0.45f | 1.85f | 0.025 | 0.015 | g | g | g | i,j | .043f | 0.25 |
X90M | 0.1 | 0.55f | 2.10f | 0.02 | 0.01 | g | g | g | i,j | – | 0.25 |
X100M | 0.1 | 0.55f | 2.10f | 0.02 | 0.01 | g | g | g | i,j | – | 0.25 |
Pipe Grade | Tensile Properties – Pipe Body of SMLS and Welded Pipes PSL 1 | Seam of Welded Pipe |
Yield Strength a | Tensile Strength a | Elongation | Tensile Strength b |
Rt0,5 PSI Min | Rm PSI Min | (in 2in Af % min) | Rm PSI Min |
A | 30,500 | 48,600 | c | 48,600 |
B | 35,500 | 60,200 | c | 60,200 |
X42 | 42,100 | 60,200 | c | 60,200 |
X46 | 46,400 | 63,100 | c | 63,100 |
X52 | 52,200 | 66,700 | c | 66,700 |
X56 | 56,600 | 71,100 | c | 71,100 |
X60 | 60,200 | 75,400 | c | 75,400 |
X65 | 65,300 | 77,500 | c | 77,500 |
X70 | 70,300 | 82,700 | c | 82,700 |
Pipe Grade | Tensile Properties – Pipe Body of SMLS and Welded Pipes PSL 2 | Seam of Welded Pipe |
Yield Strength a | Tensile Strength a | Ratio a,c | Elongation | Tensile Strength d |
Rt0,5 PSI Min | Rm PSI Min | R10,5IRm | (in 2in) | Rm (psi) |
| | | Af % | |
Minimum | Maximum | Minimum | Maximum | Maximum | Minimum | Minimum |
BR, BN,BQ,BM | 35,500 | 65,300 | 60,200 | 95,000 | 0.93 | f | 60,200 |
X42,X42R,X2Q,X42M | 42,100 | 71,800 | 60,200 | 95,000 | 0.93 | f | 60,200 |
X46N,X46Q,X46M | 46,400 | 76,100 | 63,100 | 95,000 | 0.93 | f | 63,100 |
X52N,X52Q,X52M | 52,200 | 76,900 | 66,700 | 110,200 | 0.93 | f | 66,700 |
X56N,X56Q,X56M | 56,600 | 79,000 | 71,100 | 110,200 | 0.93 | f | 71,100 |
X60N,X60Q,S60M | 60,200 | 81,900 | 75,400 | 110,200 | 0.93 | f | 75,400 |
X65Q,X65M | 65,300 | 87,000 | 77,600 | 110,200 | 0.93 | f | 76,600 |
X70Q,X65M | 70,300 | 92,100 | 82,700 | 110,200 | 0.93 | f | 82,700 |
X80Q,X80M | 80,.500 | 102,300 | 90,600 | 119,700 | 0.93 | f | 90,600 |
Q: Are you a manufacturer?
A: Yes , we are a seamless steel pipe manufacturer, We have own factory, which is located in Shandong,China. We have a leading power in producing and exporting hot rolled seamless steel pipe,cold rolled seamless steel pipe,cold drawn seamless steel pipe and Alloy Seamless Steel Pipe etc. We promise that we are what you are looking for.
Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up .
Q: Do you have quality control?
A: Yes, we can accept BV, SGS third inspection .
Q: Can you arrange the shipment?
A: Sure, we have permanent freight forwarder who can gain the best price from most ship company and offer professional service.
Q: How long is your delivery time?
A: Generally it is 7-14 days if the goods are in stock. or it is 25-35 days if the goods are not in stock, it is according to quantity.
Q:How can we get the offer?
A:Please offer the specification of the product,such as material,size,shape,etc.So we can give the best offer.
Q:Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real samples,but customers need to pay the freight cost.
Q: How do you make our business long-term and good relationship ?
A: 1.We keep good quality and competitive price to ensure our customers' benefit.
2.We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.