PRODUCT DESCRIPTION
St37 hot-rolled steel coils is a German steel grade and belongs to carbon structural steel materials.
There are also several small brands, such as: St37-2 St37-3U St37-3n RSt-2 USt37-2, etc.
Carbon structural steel, a kind of carbon steel. The carbon content is about 0.05% to 0.70%, and some can be as high as 0.90%. It can be divided into two types: ordinary carbon structural steel and High-Quality Carbon Structural Steel.
Carbon structural steel has many uses and is used in a large amount. It is mainly used in railways, bridges, and various construction projects to manufacture various metal components that bear static loads, mechanical parts and general weldments that are not important and do not require heat treatment. Moreover, carbon steel can be divided into low carbon steel, medium carbon steel and high carbon steel according to chemical composition (that is, carbon content).
Material ST37 performance and application: The material has good performance, that is, through cold rolling, cold-rolled strip steel and steel plate with thinner thickness and higher precision can be obtained, with high flatness, high surface finish, and clean and bright surface of cold-rolled steel plate. , easy for coating and processing, many varieties, wide application, and has the characteristics of high stamping performance, no aging, and low yield point, so the Strait ST12 cold-rolled steel plate is mainly used in automobiles, printed iron drums, construction, building materials, bicycles, etc. industry, and it is also the material selection for the production of organic coated steel sheets. ST12 cold-rolled steel strip standard is DIN1623, ST12 is ordinary cold-rolled steel strip, ST13 stamping grade cold-rolled steel, ST14 is deep-drawing grade cold-rolled steel; ST12 cold-rolled steel Strip steel is expressed as the most common steel grade.
Product | Carbon Steel Sheet In Coil |
Commodity | Cold Rolled Steel Coil | Hot rolled Steel Coil |
Grade | Q195,Q215,Q235,08AL,SPCC,SPCD,SPCE,SPCEN,ST12, ST13,ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06 | Q195,Q215A,Q215B,Q215AF,Q215BF,Q235A, Q235B,Q235C,Q235D,Q235BF,Q255A,Q255B,Q275A, Q275B, Q275C,Q275D,A36,GR36 ,20#, 45#, 10# ,T9,T12,JIS G3101 SS400,SS330,S235JR,S355JR, A992, A500, ASTM A283-B/A283C, ASTM A572 Gr50-B/A572 Gr42-B, ASTM A515 Gr70, ASTM A516 Gr70, EN10025-2:2004 S235JR-S355K2+N, EN10025-5:2004 S355J2W/S355K2W .etc. |
Standard | ISO,JIS,ASTM,AS EN | ISO,JIS,ASTM,AS EN |
Surface treatment | Chromated and oiled, and ant-finger | Chromated and oiled, and ant-finger |
Hardness | Softy, half hard ,hard quality | Softy, half hard ,hard quality |
Thickness | 0.12-200mm | 0.12-6mm |
Width | 600-1500mm | 600-1500mm |
Coil weight | 3-30MT/Coil or as your request | 3-30MT/Coil or as your request |
Packaging | Export standard, seaworthy | Export standard, seaworthy |
Transport Type | Container, bulk and train | Container, bulk and train |
PRODUCT DETAILS
Category | Grades | Standard |
Carbon structure steel | Q195, Q215, Q235, Q275 | GB/T700-2006 |
Low alloy high strength structure steel | Q295, Q345, Q390, Q420, Q460 | GB/T1591-2008 |
Prime Carbon structure steel | 10#, 20#, 35#, 45#, 60#, 20Mn, 65Mn, B2, B3, JM20, SH45,S45C, C45 | GB/T699-1999 |
Alloy structure steel | 30Mn2, 40Mn2, 27SiMn, 42Crmo, 20Cr,40Cr,20CrMo, 35CrMo, 20CrMnTi, 30CrMnTi, 20MnVB, 20MnTiB, 45MnV, 20CrNiMo, Q345B, 35MnBM,40MnB,36Mn2V | GB/T3077-1999 |
Spring Steel | 65Mn, 60Si2Mn, 50CrVA | GB/T1222-84 |
Bearing Steel | GCr15, GCr15GD,55SiMoV | GB/T18254-2002 |
Structural steels subject to end-quench hardenability requirements | 20CrMnTi, 30CrMnTi, 20Cr, 40Cr, 30CrMo, 42CrMoA, 27SiMn, 40Mn2H, 20CrNiMo, 40Mn2, q345b,35MnBM, 40MnB,45MnV. | GB/T5216-2004 |
Oil wells structural steel | 37Mn5, 36Mn2V | Q/LYS248-2007 |
Marine anchor chain steel | CM490, CM690, M30Mn2 | YB/T66-1987 |
GB/T18669-2002 |
PRODUCT DISPLAY
EXHIBITION OF COOPERATION
CERTIFICATION
FAQ
Q:Can I get samples before order ?
A:Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.
Q:Can I go to your factory to visit?
A:Of course, we welcome customers from all over the world to visit our factory.
Q:What product information do I need to provide?
A:You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.
Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.we accept third party inspection.
Q:How do we trust your company?
A:We specialise in steel business for years, headquarter locates in Liaocheng, Shandong province, you are welcome to investigate in any ways, by all means, we have CE and ISO9001 certificate, quality can be guaranteed.