ASTM A179 Gr.C Boiler Steel Tube is a kind of boiler tube, the manufacturing method is the same as that of seamless tube, but there are strict requirements for the steel used to manufacture the steel tube. Boiler seamless pipes are often used in high temperature and high pressure conditions, and the pipes will be oxidized and corroded under the action of high temperature flue gas and water vapor. The Steel Pipe is required to have high lasting strength, high oxidation corrosion resistance, and good organizational stability. Boiler seamless pipes are mainly used to manufacture high-pressure steam pipes, main steam pipes and other boiler seamless pipes. According to the temperature of use, it is divided into ordinary boiler tubes and high-pressure boiler tubes.
(1) Manufacturing method:
①The use temperature of seamless pipes for boilers is generally below 450 ℃, and domestic pipes are mainly made of No. 10 and No. 20 carbon steel hot-rolled pipes or cold-drawn pipes.
②Seamless pipes for high pressure boilers are often used in high temperature and high pressure conditions, and the pipes will be oxidized and corroded under the action of high temperature flue gas and water vapor. Steel pipes are required to have high lasting strength, high oxidation corrosion resistance and good organizational stability.
(2) Purpose:
①Universal boiler seamless pipes are mainly used to manufacture water wall pipes, boiling water pipes, superheated steam pipes, superheated steam pipes for locomotive boilers, large and small smoke pipes, arch brick pipes, etc.
②Seamless tubes for high-pressure boilers are mainly used to manufacture superheater tubes, reheater tubes, gas guide tubes, main steam tubes, etc. of high-pressure and ultra-high-pressure boilers.
Product Name | ASTM A179 Gr.C Boiler Steel Tube |
Standard | ASTM A179 Gr.C |
Material | GB:10 # ASTM:A179 JIS:G3461 STB30 DIN:17175 ST35.8 |
Technology | Hot Rolled ,Cold Rolled,Cold Drawn,Hot Expended |
Chemical Composition | C:0.07-0.14% Si:0.17~0.37% Mn:0.35~0.65% S≤:0.04% P≤:0.35% Cr≤:0.15% Ni≤:0.25% Cu≤:0.25% |
Mechanical Property | Tensile Strength/MPa:335 Yield Strength/MPa:≥205 Elongation(%):≥31 |
Tolerance | Control with in the standard, OD:+/-1%, WT:+/-5% |
Application | Widely used in automobiles, motorcycles, gas springs, hydraulic machinery, construction machinery and refrigeration industry |
Payment Terms | 1.FOB 30%T/T,70% Before shipment 2.CIF 30% Pre-payment , Balance must be paid before shipment 3.Irrevocable 100% L/C at sight |
Third Party Inspection | SGS ,BV, MTC |
Advantages | 1.Short delivery time 2.Quality assurance 3.Competitive price, 4.Free Sample |
Delivery Time | Within 25 days after receipt of advance payment |
1. The main production process of hot-rolled Seamless Steel Pipe (main inspection process):
Tube blank preparation and inspection→tube blank heating→piercing→tube rolling→steel reheating→fixed (reduced) diameter→heat treatment △→finished tube straightening→finishing→inspection (non-destructive, physical and chemical, Taiwan inspection)→warehousing
2. The main production process of cold-rolled (drawn) Seamless Steel Pipes:
Billet preparation→pickling lubrication→cold rolling (drawing)→heat treatment→straightening→finishing→inspection
Our products aye widely used in water engineering,petrochemical industry,chemical industry,electric power industry,agricultural irrigation,urban construction.
Used for liquid conveying:water supply and drainage.For gas transport:gas,steam,liquefier petroleum gas.
For structural use:as pile pipe,as a bridge;Pipes for wharves,roads and building structures.
Q: Are you a manufacturer?
A: Yes , we are a seamless steel pipe manufacturer, We have own factory, which is located in Shandong,China. We have a leading power in producing and exporting hot rolled seamless steel pipe,cold rolled seamless steel pipe,cold drawn seamless steel pipe and Alloy Seamless Steel Pipe etc. We promise that we are what you are looking for.
Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up .
Q: Do you have quality control?
A: Yes, we can accept BV, SGS third inspection .
Q: Can you arrange the shipment?
A: Sure, we have permanent freight forwarder who can gain the best price from most ship company and offer professional service.
Q: How long is your delivery time?
A: Generally it is 7-14 days if the goods are in stock. or it is 25-35 days if the goods are not in stock, it is according to quantity.
Q:How can we get the offer?
A:Please offer the specification of the product,such as material,size,shape,etc.So we can give the best offer.
Q:Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real samples,but customers need to pay the freight cost.
Q: How do you make our business long-term and good relationship ?
A: 1.We keep good quality and competitive price to ensure our customers' benefit.
2.We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.